Compressors

OIL LESS DIRECT DRIVE COMPRESSORS

 

SO1/6 1.5 HP VENTO

NUAIR 7hp Compresoors

A basic direct drive oil less compressor, for use in the workshop or (with a suitable gun) for touch up work on site.

  • Motor – 1.1 kW, 1.5 HP
  • Capacity – 190 lt/min, 6.7 CFM
  • Pressure – 8 Bar, 116 PSI
  • Receiver – 6 litres
  • Voltage – 230/1/50
  • Dimensions (LxWxH mm) 530 x 210 x 520
  • Product Code – SA6BB304SHA

 
 

LUBRICATED DIRECT DRIVE COMPRESSORS

 

NDV/50CM3 2.2 kW / 3 HP 50 litre 8 Bar Compressor

NUAIR 7hp Compresoors

An entry level lubricated direct drive compressor for occasional workshop use. Ideal for the user wanting to do the odd spray job and as a general purpose air supply.

  • Motor – 2.2 kW, 3 HP
  • Capacity – 356 lt/min, 12.6 CFM
  • Pressure – 8 Bar, 116 PSI
  • Receiver – 50 litres
  • Voltage – 230/1/50
  • Dimensions (LxWxH mm) 830 x 350 x 670
  • Product Code – SSXDL504FPSS04

 
 

TECH SERIES LUBRICATED BELT DRIVEN

 

NB2800B/50/3M TECH 2.2kW / 3HP 50 litre 10 Bar Compressor

NUAIR 7hp Compresoors

A belt driven lubricated piston compressor for spray and workshop use. Runs slower than equivalent direct drive units and is more suited to daily use for spraying

  • Motor – 2.2 kW, 3 HP
  • Capacity – 355 lt/min, 12.5 CFM
  • Pressure – 10 Bar, 145 PSI
  • Receiver – 50 litres
  • Voltage – 230/1/50
  • Dimensions (LxWxH mm) 875 x 375 x 790
  • Product Code – S28DA504FPS032

 
 

BLUE STAR SERIES LUBRICATED BELT DRIVEN

 

NB38C/150 FM3 2.2kW / 3HP 150 litre 10 Bar Compressor

NUAIR 7hp Compresoors
A belt driven workshop compressor for the more serious user. 150 litre air reservoir means the pump does not need to cut in so often, to keep up with demand. The largest single phase compressor we have available that requires only a 16A supply

  • Motor – 2.2 kW, 3 HP
  • Capacity – 355 lt/min, 13.95 CFM
  • Pressure – 10 Bar, 145 PSI
  • Receiver – 150 litres
  • Voltage – 230/1/50
  • Dimensions (LxWxH mm) 1390 x 430 x 950
  • Product Code – S36HN504FPS012

 

NB7/200 FT 5 4 kW / 5.5HP 200 litre 10 Bar Compressor

NUAIR 7hp Compresoors

An entry level 3 phase unit with a 23.7 cfm displacement and a 200 litre tank. This is for customers wanting to run spray pumps, air sanders or more than one spray gun.

  • Motor – 4 kW, 5.5 HP
  • Capacity – 680 lt/min, 24 CFM
  • Pressure – 10 Bar, 145 PSI
  • Receiver – 200 litres
  • Voltage – 400/3/50
  • Dimensions (LxWxH mm) 1450 x 550 x 980
  • Product Code – SN7LN701FPS044

 

NB7/270 FT 7 5.5 kW / 7.5HP 270 litre 10 Bar Compressor 

NUAIR 7hp Compresoors

3 phase belt driven piston compressor with a higher output and 270 litre tank. Recommended for pumps, multi gun set ups and air sanders. Also for those users that want to know the have something in reserve as the demand for air grows.

  • Motor – 5.5 kW, 7.5 HP
  • Capacity – 840 lt/min, 29.7 CFM
  • Pressure – 10 Bar, 145 PSI
  • Receiver – 270 litres
  • Voltage – 400/3/50
  • Dimensions (LxWxH mm) 1500 x 500 x 1110
  • Product Code – SN7NN801FPS018